Search
Better Farming OntarioBetter PorkBetter Farming Prairies

Better Farming Ontario Featured Articles

Better Farming Ontario magazine is published 11 times per year. After each edition is published, we share featured articles online.


German firms team up for combine-truck solutions

Wednesday, November 5, 2014

Bavaria's Horsch machinery firm is collaborating with trailer manufacturer Fliegl to develop a crawler dolly that can work with a road-going bulk grain trailer at fieldside and hopes to have a commercial model ready by next year

by NORMAN DUNN

Controlled traffic farming (CTF) has definitely caught on in Europe, most of all with the big players in grain production. The Horsch family concern in Bavaria, for instance. This is mainly, of course, a premier machinery manufacturing firm. But the company does run its own test farms, including an 8,000-acre spread in the Czech Republic. Here, conventional CTF currently clashes with combine grain transfer in the field.

Chasers, multi-axle drop-door trailers, even road-going trucks: they're all out on the stubble nowadays, scurrying around trying to keep up with the output of combining giants that can dump over 14 tons at a time  into a wagon (e.g. the New Holland 652, JD S690, etc.) and manage that five or six times an hour when the going is good!

Logically, the system calls for the biggest road-going trucks loaded directly by the combine. Maybe this approach could fit into CTF, but there are traction – and compaction – difficulties to think about. Horsch is teaming up with continental trailer manufacturer Fliegl and developing an idea based on this logical combine-truck solution. A tractor-pulled crawler "dolly" is currently on test on the Czech farm. This slides under a road-going bulk grain trailer at the fieldside and hydraulically heaves it off the ground. Attachment points at front and rear keep the trainer steady at speeds of up to 25 m.p.h. across the field.  

For extra traction, the dolly is not only pulled but also powered, with tractor-powered hydraulic pumps driving each track. And while Horsch realizes that other farms might have different working widths for their CTF systems, the dolly track width can be changed from the conventional three metres, once again hydraulically and straight from the tractor seat.

The concept is still being worked on. But Horsch says there could well be a commercial development of its crawler dolly on sale from next year.

Cultivation, manure injection and drilling
Looking at the other end of the farming year takes us to seeding time and a development for single-pass establishment with ideal CTF application. This time, the bright ideas come not from multinational manufacturing co-operation, but instead from a single farm contractor business – R.C. Baker of Oxfordshire, England.

Teamed up here are large-capacity (25-30 ton) slurry tankers with slurry injection via attached strip tillage cultivators carrying pneumatic drill systems for simultaneous seed drilling. Seeding canola straight into wheat stubble complete with slurry fertilizer over a six-metre working width is the aim here. But it has to be said that the equipment used is continually being changed and fine-tuned towards a target of smooth and efficient cultivation, slurry injection, crop drilling and reconsolidation in a single seven-m.p.h. operation.

There are a number of R.C. Baker rigs involved, all so far pulled and powered by Claas Xerion 388 HP machines. Behind the tankers can be, for example, X-Till strip cultivators from north German manufacturer Vogelsang. These established 20-centimetre-wide tilled strips with 15-25 centimetres deep tine cultivation, slurry being injected at each tine. A Stocks TurboJet pneumatic drill (Cambridgeshire, England) is so far being tested on strip cultivators, dropping canola seed just before reconsolidation rollers that follow up each tilled strip.

As mentioned, the final lineup isn't yet set in concrete. But, just like the tracked dolly brainwave from Horsch, the savings in farming efficiency are already looking attractive. BF

Current Issue

June/July 2025

Better Farming Magazine

Farms.com Breaking News

Ontario crops respond to summer heat

Wednesday, July 2, 2025

According to the OMAFA Field Crop News team, Ontario field crops are showing rapid development as summer-like temperatures have dominated late June early July. The warm spell has accelerated growth and helped reduce the heat unit deficit from a cool spring. Corn fields have seen a burst... Read this article online

Canada’s Place in Global Food System Resilience

Wednesday, July 2, 2025

Canada’s food system is facing serious pressure due to global supply chain issues, climate change, and rising food prices. According to a KPMG report, bold and united action is needed now to make Canada’s agriculture sector more resilient and self-reliant. With the global population... Read this article online

Calf Auction Raises Funds for Youth

Monday, June 30, 2025

Wyatt Westman-Frijters from Milverton won a heifer calf named Ingrid through a World Milk Day promotion by Maplevue Farms and a local Perth, Ontario radio station. Instead of keeping the calf, 22-year-old Westman-Frijters chose to give back to the community. The calf was sent to the... Read this article online

BF logo

It's farming. And it's better.

 

a Farms.com Company

Subscriptions

Subscriber inquiries, change of address, or USA and international orders, please email: subscriptions@betterfarming.com or call 888-248-4893 x 281.


Article Ideas & Media Releases

Have a story idea or media release? If you want coverage of an ag issue, trend, or company news, please email us.

Follow us on Social Media

 

Sign up to a Farms.com Newsletter

 

DisclaimerPrivacy Policy2025 ©AgMedia Inc. All rights reserved. This material may not be published, broadcast, rewritten or redistributed.
Back To Top